'Knifeboard std.' - Knife rail in oak, smoked oak or walnut
The bestseller 'Knifeboard Std.' is for those who would like to have their knives hanging freely on a classic, handmade magnetic knife rail without fuzz.
The rail is magnetic along the entire length, so you can easily have 7-8 knives hanging on 40cm.
In our knife rails there are several rows of powerful Neodyminum magnets throughout the entire length of the rail, so your knives will be guaranteed hanging regardless of size and weight.
Here you'll find no cheap disc magnets, drilled in and visible from the back of the rail, as is often the case among other products on the market.
The rod magnets in our knife rails are invisibly encapsulated in the tree and are divided into several rows so you achieve optimal attachment with multiple contact points on each blade. This prevents your knives from sliding down, or spinning around the rail and being attracted to each other.
Read more about how our knife rails differ from other products on the market.
The rail is polished several times and all edges are rounded, after which it is oiled, so that it is both nice to look at and touch.
Knifeboard Std. is produced in lengths between 25 and 120 cm by default. It is 4.5 cm wide and runs approx. 2.5 cm from the wall.
All Knifeboards come with hidden suspension and the necessary brackets, screws and rawplugs are provided of course.
If you want a knife rail in special measurements, you are welcome to contact us.
About Knife Storage
Our magnetic knife rails and knife blocks have a thorough visual expression and are very high quality.
The vast majority of knife rails and knife blocks on the market are mass-produced in Asia or Eastern Europe.
With us, you only find Danish-made knife storage, handmade to order.
Unlike many other knife rails and knife blocks on the market, our knife holders are fully magnetic. This means that the rail or knife block is effective along the entire length/width, and you can place your blades however you'd like.
Many manufacturers choose to put point-magnetic products on the market that can hold only a limited number of knives, since there is only one round magnet.
The rod magnets in our products are invisibly encapsulated in the wood and are distributed in several unbroken rows. so you achieve optimal attachment with multiple contact points on each blade. That way you avoid your knives slipping down, spinning around and being attracted to each other if they sit tightly.
Strong Neodymium magnets in high quality are expensive, so many manufacturers skimp on this material. We import our own magnets directly from a manufacturer we trust, and which delivers magnets in the quality and formats we want - you will find no weak, cheap hobby magnets in our designs.
We use only powerful, high-quality N50/N52 neodymium magnets in various sizes, carefully selected to play optimally with the design of the product.
That's why we give a 100% guarantee that your knives can be placed freely and hang exactly as you want on all our designs, regardless of which one you choose - otherwise you get your money back 😎
- See our catalog of Wall-mounted knife rails
- See our catalog of Free-standing knife blocks
The knife magnets in the webshop are standard designs and formats - but you can easily have a product made according to your wishes. Just contact us, and we will make you a custom-made product.
Small changes in relation to Of course, we do the standard measurements without calculation.
If you are looking for a special type of knife magnet, or if you want to have a storage solution designed and tailored to your tastes, you are naturally welcome to contact us. We are ready to make a non-binding offer for exactly what you need.
Suspension:
All our knife rails come as standard with different types of hidden brackets for screw suspension on the back (screws and rawlplus) Included)
- but do you have e.g. A tile wall that you do not want to screw in, most knife rails can also be made without suspension so they can be glued up with eg. "No more nails" from Pattex or a similar assembly glue. Special requests for suspension are stated in the comments when ordering.
Return policy
When you order a unique product in the webshop without having "seen it in reality", there will always be some degree of uncertainty, since no two products will be the same or have the same visual expression - maybe the result wasn't quite as you imagined or expected.
Therefore, all knife holders are fully returnable - even if they are custom made.
Copper details?
You can now get all RJ Woodworks products with copper details as an alternative to brass or aluminium for an additional charge depending on size and design.
If you are interested in inquiring about the price for a product with copper details, please feel free to send an mail
We only use carefully curated FSC certified furniture wood. The primary woods are oak, smoked oak and walnut. In addition, we offer a number of special types of wood that are sold in conjunction with special orders, e.g. Teak, ash, chestnut, golden rain, cherry, wengé, zebrano, beech, etc.
We finish all products with a high-quality wood oil, but if you would prefer e.g. an oil with a white pigment, we can of course do that too - the desired final treatment can be mentioned under the remarks of the ordering.
If you do not find what you are looking for on this page, or if you have questions, we can be contacted by phone +45 4243 4393 or mail.
NOTE that we are always trying to create unique and elaborate products with an exciting visual expression and colour profile. You should therefore take our product photos with a grain of salt and not as a guarantee of how the finished product looks.
Remember, wood is a living material. There are no two pieces of wood that are identical, so all product photos are only indicative.
You can do a little surfing on our website and see examples of products we have made in the different woods to get a better impression of the colour variations of the woods, structure and expression.
If you are in any doubt about choosing a type of wood for a product, you are welcome to contact us for a chat about the possibilities. We gladly counsel and seek to inspire 😊
In general
All product photos are real photos of the specific products. However, some photos have added interiors and surroundings created using artificial intelligence to create atmosphere and put the product into context.
Regarding Woodworks
We aim to continuously expand the catalog so that sizes and designs are best illustrated in the webshop.
There are not photos of all variants and sizes, so the photo that appears when choosing a variant in the webshop mainly reflects only the type of wood - not necessarily size or other variations in the design.
NOTE that we always try to create unique wooden products with an exciting visual expression. You must therefore take our product photos as a guide and not as a guarantee of how the finished product appears in terms of year drawings and color play.
Any questions?
If you have questions about the choice of design, sizes, colors or type of wood - or if you have special wishes, you are always very welcome to contact us at info@rune-jakobsen.dk and get your questions clarified before you order.
Choose options
MANUFACTURING THE OPTIMAL MAGNETIC KNIFE BLOCK OR KNIFE RAIL IS NOT JUST ABOUT RAW STRENGTH AND THE NUMBER OF MAGNETS.
It's all about aesthetics and know-how in relation to choosing the right type of magnets for the task and placing them in the wood in such a way that optimal adhesion to the knife blade is achieved at the same time that the knife can be easily removed from the block or rail without using unnecessary power.
It is this kind of know-how that characterizes the knife holders from Rune-Jakobsen Design.
Read more about our knife holders here:We know what we're doing - so whether you get a standard product made or your knife holder custom made, we go to great lengths to create the best, most beautiful and most functional knife storage you can find on the market.
Every time!