'Nordic Noir' black stained magnetic knife block

- is a classic and well-known type of wood. The color in the inner part of the trunk (the heartwood) goes from reddish to grey-brown depending on the oak variety, and it gets darker with age and exposure to light. The outermost part of the trunk (the splinter) is lighter and without as much color pigment.

 

 

 

 

 

 

 

 

- is oak that has gone through a steam treatment, which results in the coloring of the wood. We only use "real" smoked oak - i.e. that we do not cut corners by using a dark stain or dark-colored oil. Therefore, our smoked oak can also vary slightly in its expression of color.

Depending on the woods own acid content, the color after treatment can vary from light honey brown to deep black. The smoked wood does not contain any harmful substances after treatment. NOTE that smoked oak can stain if it comes into direct, long-lasting contact with regular light oak or brass table plates.

NOTE the colour of the finished oak may vary. Therefore, 100% uniformity in the entire product cannot be expected. If you do not like the finished result, we will of course exchange with a smile😊

 

You are welcome to contact us before ordering if you have special wishes for the smoked oak. We can tone it from completely light to very dark as desired.

 

 

 

- is a very beautiful variety of wood with lively vein lines that change from light to dark brown with an at times dark purple glow. Vein lines, colours and structure of walnut trees vary greatly - but it is always beautiful..

 

 

 

 

 

- Wengé is a very hard and dark wood that grows in central parts of Africa. Wengé is used exclusively in our Black Edition Products

 

The vast majority of knife rails and knife blocks on the market are mass-produced in factories in Asia or Eastern Europe.

With us, you will only find 100% Danish-made knife storage, handmade to order especially for you.

Unlike many other knife rails and knife blocks on the market, our knife holders are fully magnetic . This means that the rail or knife block is effective over the entire length/width and you can position your knives as desired.

We only use strong, high-quality neodymium magnets in various sizes and formats, which are carefully selected so that they play optimally with the knife rail's design and purpose.

Many manufacturers choose to send point magnetic products on the market that can only hold a limited number of knives as there is only one round magnet per blade. knife.

In our knife rails, there are several continuous rows of powerful N52 Neodyminum magnets along the entire length of the rail, so your knives are guaranteed to hang regardless of size and weight.

So with us you will find no cheap disc magnets drilled into the wood from the back of the rail, as is often the case with other rails on the market.

The bar magnets in our products are invisibly encased in the wood and are distributed in several unbroken rows so that you achieve optimal adhesion with several contact points on each knife blade. In this way, you avoid your knives sliding down, or "spinning" around and being attracted to each other if they are tight.

A magnet is not just a magnet.
Powerful N52 Neodymium magnets in high quality are expensive, so many manufacturers skip where the bar is lowest.

We import our magnets ourselves directly from a manufacturer we trust, and who delivers our custom-made magnets in exactly the quality and formats we want - so you won't find any cheap hobby magnets in our designs.

That's why we give a 100% guarantee that your knives can be placed freely and hang exactly as you want on all our designs, regardless of which one you choose - otherwise you get your money back 😎

• See the selection of wall-hung knife rails
• See the selection of freestanding knife blocks

The knife magnets in the webshop are standard designs and formats - but you can easily have a product made according to your wishes. Just contact us - and we will create a tailor-made product for you.

Of course, we make small changes compared to the standard measurements without charge.

If you are looking for a special type of knife magnet or want to have a storage solution designed and tailored, you are of course also welcome to contact us . We are ready to make a non-binding offer for exactly what you need.

Suspension:
All our knife rails come as standard with different types of hidden brackets for screw mounting on the back (screws and rawlplugs included)

- but do you have e.g. a tiled wall that you don't want to screw into, most knife rails can also be produced without suspension so that they can be stuck up with e.g. "No more nails" from Pattex or a similar assembly glue. Special requests for suspension are stated in the comments when ordering.

Right of return
When you order a unique knife rail or knife block in the webshop without having "seen it in real life", there will always be a built-in uncertainty as two products are never the same or have the same visual expression - so perhaps the result was not quite as you had imagined you or expected.

That is why there is a full right of return on all knife holders - even if they are custom-made.