CARE & MAINTENANCE

Even if you use our boards often, with the right treatment they will remain beautiful for many years. If you use the board as a cutting board, however, scratches and marks will appear in the wood - unfortunately this cannot be avoided.

Please note that wood is a living material that expands and contracts depending on temperature and humidity - unfortunately metal does not, so you will find that with boards with brass or aluminium, the metal will occasionally "stud" a little - and other times it will be drawn accordingly into the tree. Hopefully, however, it will most often sit where it should as when the board was created.

Wash the board by hand immediately after use, or wipe it with a wet/damp cloth. Remember to wet the board on both sides and let it dry by placing it on its side, otherwise it may warp.

Limitations of Use.

● May only be maintained with food-approved cooking oil

In case of further questions, please feel free to contact us.

The board can easily withstand general. hand wash with washing-up liquid, but the soap will eventually remove the oiling.

NOTE that boards in smoked oak can "contaminate" if they come into direct, prolonged contact with ordinary light oak or brass table tops.

You can give the board a thin layer of ordinary cooking oil on all surfaces from time to time - this will preserve the wood's glow. The board must be completely dry before you apply oil. Should the board nevertheless become a little "rough" to the touch over time, it is because the wood's fibers rise slightly on the surface.

You can make the board smooth again by sanding the wood gently in the direction of the grain with a fine-grained sandpaper with a grain size of 400 or higher, and then giving it a thin layer of Alm. cooking oil (e.g. sunflower oil).