'Grounded' cutting board
Tax excluded. Shipping calculated at checkout
GROUNDED is a design with asymmetrical details.
On the long sides, the brass or aluminum rails are placed down towards the table, which gives a good "weight" to the board.
On the front, the rails are placed high on the board and help to mark the cutout of the hand grips.
GROUNDED is made both with and without juice groove.
The grooves are 2 cm wide and approx. 1 cm deep and can therefore hold a lot of liquid so you don't have it running all over the table, as is often the case with other types of juicers that are mostly for decoration. Juice groove is of course made without charge.
The board is made with brass details as standard. If you want aluminium, you can write it as a note in the shopping basket.
About boards
Our range of handmade cutting boards help you with your cooking and dress up any kitchen or dining table.
We make everything from small chopping boards to huge display boards, so you can definitely find a cutting board with us that matches your wishes and needs.
The vast majority of cutting boards on the market are mass-produced in Asia or Eastern Europe - but with us you will only find hand-made, Danish-produced quality products in oak or walnut made in our own joinery.
The cutting boards are made individually to order, and we make every effort to give each board a beautiful, harmonious and individual look.
The small difference that makes the big difference!
Unlike many other cutting board manufacturers, we consider a cutting board as a piece of furniture that must be made with care.
We spend time creating a harmonious and visual expression.
We prioritize spending time on both coarse, medium and fine sanding with washing down between each sanding, so that the end result is a cutting board with a silky smooth finish that patinas beautifully so that you can enjoy it for many years without it becoming rough and tedious to look and feel.
We do not make "buy cheap - use and throw away" cutting boards
Only solid FSC certified furniture wood is used for all our designs. Likewise, the production of cutting boards is under the control of the Danish Food Agency.
- See the entire selection of cutting boards
RETURN RIGHT
When you order a unique cutting board in the webshop without having "seen it in reality", there will always be a built-in uncertainty as no two boards are ever the same or have the same expression - so perhaps the result was not quite as you had imagined or expected.
That is why there is a full right of return on all cutting boards - even if they are custom-made.
We only use carefully curated FSC certified furniture wood. The primary woods are oak, smoked oak and walnut. In addition, we offer a number of special types of wood that are sold in conjunction with special orders, e.g. Teak, ash, chestnut, golden rain, cherry, wengé, zebrano, beech, etc.
We finish all products with a high-quality wood oil, but if you would prefer e.g. an oil with a white pigment, we can of course do that too - the desired final treatment can be mentioned under the remarks of the ordering.
If you do not find what you are looking for on this page, or if you have questions, we can be contacted by phone +45 4243 4393 or mail.
NOTE that we are always trying to create unique and elaborate products with an exciting visual expression and colour profile. You should therefore take our product photos with a grain of salt and not as a guarantee of how the finished product looks.
Remember, wood is a living material. There are no two pieces of wood that are identical, so all product photos are only indicative.
You can do a little surfing on our website and see examples of products we have made in the different woods to get a better impression of the colour variations of the woods, structure and expression.
If you are in any doubt about choosing a type of wood for a product, you are welcome to contact us for a chat about the possibilities. We gladly counsel and seek to inspire 😊
Rune-Jakobsen Woodworks are handmade to order, so you should therefore expect it to take approx. 12-15 working days before your order is ready for delivery (applies to the period 1 February to 31 October.)
In the period 1 November - 31 January, you should expect a further 5-7 working days' delivery time.
NOTE that we always try to create unique products with an exciting visual expression and play of colors. You must therefore take our photos as a guide and not as an expression of how a standard product looks.
If you would like a delivery estimate before ordering or if you have any questions, you are very welcome to call (+45) 42 43 43 93 or send an email ten. info@rune-jakobsen.dk
JUICE ROLLER
The juice grooves in our boards are not just for decoration. They are 19mm wide and 10mm deep, and can therefore hold a lot of liquid so that it stays on the board instead of running over the table.
ENGRAVING
I am happy to laser engrave your name or logo in your product free of charge.
Contact me before ordering if you want to inquire about the options.
COPPER DETAILS
We offer to manufacture all Woodworks products with copper details instead of brass or aluminum for a surcharge of 5-15% depending on size and design.
If you are interested in inquiring about the price for a product with copper details, please feel free to send an email to info@rune-jakobsen.dk
Copper details?
You can now get all RJ Woodworks products with copper details as an alternative to brass or aluminium for an additional charge depending on size and design.
If you are interested in inquiring about the price for a product with copper details, please feel free to send an mail
Care and maintenance, cutting boards
CARE & MAINTENANCE
Even if you use our boards often, with the right treatment they will remain beautiful for many years. If you use the board as a cutting board, however, scratches and marks will appear in the wood - unfortunately this cannot be avoided.
Please note that wood is a living material that expands and contracts depending on temperature and humidity - unfortunately metal does not, so you will find that with boards with brass or aluminium, the metal will occasionally "stud" a little - and other times it will be drawn accordingly into the tree. Hopefully, however, it will most often sit where it should as when the board was created.
Wash the board by hand immediately after use, or wipe it with a wet/damp cloth. Remember to wet the board on both sides and let it dry by placing it on its side, otherwise it may warp.
Limitations of Use.
● Do not put in the dishwasher● Do not use for long-term food storage
● Do not use for purposes other than cooking/preparation for cooking
● May only be maintained with food-approved cooking oil
In case of further questions, please feel free to contact us.
The board can easily withstand general. hand wash with washing-up liquid, but the soap will eventually remove the oiling.
NOTE that boards in smoked oak can "contaminate" if they come into direct, prolonged contact with ordinary light oak or brass table tops.
You can give the board a thin layer of ordinary cooking oil on all surfaces from time to time - this will preserve the wood's glow. The board must be completely dry before you apply oil. Should the board nevertheless become a little "rough" to the touch over time, it is because the wood's fibers rise slightly on the surface.
You can make the board smooth again by sanding the wood gently in the direction of the grain with a fine-grained sandpaper with a grain size of 400 or higher, and then giving it a thin layer of Alm. cooking oil (e.g. sunflower oil).
In general
All product photos are real photos of the specific products. However, some photos have added interiors and surroundings created using artificial intelligence to create atmosphere and put the product into context.
Regarding Woodworks
We aim to continuously expand the catalog so that sizes and designs are best illustrated in the webshop.
There are not photos of all variants and sizes, so the photo that appears when choosing a variant in the webshop mainly reflects only the type of wood - not necessarily size or other variations in the design.
NOTE that we always try to create unique wooden products with an exciting visual expression. You must therefore take our product photos as a guide and not as a guarantee of how the finished product appears in terms of year drawings and color play.
Any questions?
If you have questions about the choice of design, sizes, colors or type of wood - or if you have special wishes, you are always very welcome to contact us at info@rune-jakobsen.dk and get your questions clarified before you order.
Choose options
Why choose a board from Rune-Jakobsen Design?
Our range of handmade cutting boards help you with your cooking and dress up any kitchen or dining table.
We make everything from small chopping boards to huge display boards, so you can definitely find a cutting board with us that matches your wishes and needs.
The vast majority of cutting boards on the market are mass-produced in Asia or Eastern Europe - but with us you will only find hand-made, Danish-produced quality products in oak or walnut made in our own joinery.
The cutting boards are made individually to order, and we make every effort to give each board a beautiful, harmonious and individual look.
The small difference that makes the big difference!
Unlike many other cutting board manufacturers, we consider a cutting board as a piece of furniture that must be made with care.
We spend time creating a harmonious and visual expression. We prioritize spending time on both coarse, medium and fine sanding with washing down between each sanding, so that the end result is a cutting board with a silky smooth finish that patinas beautifully so you can enjoy it for many years without it becoming rough and tedious to look and feel.
In other words, we do not make "buy cheap - use and throw away" cutting boards
Only solid FSC certified furniture wood is used for all our designs. Likewise, the production of cutting boards is under the control of the Danish Food Agency.
- See the entire range of cutting boards
RETURN RIGHT
When you order a unique cutting board in the webshop without having "seen it in reality", there will always be a built-in uncertainty as no two boards are ever the same or have the same expression - so perhaps the result was not quite as you had imagined or expected.
That is why there is a full right of return on all cutting boards - even if they are custom-made.
