Magnetic knife holder for vertical mounting, with leather front, 40–60 cm – Leather Protected Vertical – multiple variants
Tax included. Shipping calculated at checkout
Every magnetic knife holder is handmade to order.
If you order today, your knife magnet will be shipped between January 11 and January 17.
Leather Protected Vertical – magnetic knife holder for vertical mounting with leather front
Leather Protected Vertical is designed for those who want their knives hanging horizontally on a vertically mounted magnetic knife holder – with a bold leather look. A magnetic knife rack in solid wood, handmade in Denmark.
Leather Protected Vertical is a 15 cm wide magnetic knife holder, magnetic along its entire length and faced with Italian Tuscan Vacchetta leather. The bold leather front protects your blades gently and effectively.
Features:
Vertical mounting places special demands on the magnetisation. The knife holder is therefore built with invisibly encapsulated magnets in several parallel rows along the entire length. This gives multiple contact points on every blade and an evenly distributed magnetic force that holds the knife steady in a horizontal position – without sliding, rotating or being pulled towards the neighbouring blade.
The raw leather edge is sanded flush with the knife holder's narrow, visible wooden edge, and the bevelled rear edges create a beautiful shadow line against the wall.
Please note: Not all knives suit a vertical knife holder. Blades with a low proportion of magnetic alloy, very narrow blades or heavy handles can be difficult to hold in a horizontal position – regardless of the knife holder's magnetic strength. If in doubt about your knives, feel free to ask before ordering.
Leather Protected Vertical comes with concealed brackets for vertical mounting; screws and wall plugs are included.
Sizes:
Leather Protected Vertical is made in lengths of 40, 50 or 60 cm. Width 15 cm, depth 2.5 cm. Leather colour: black, brown or light brown. Available in solid oak, smoked oak or walnut.
Quality:
All our magnetic knife holders – knife magnets in solid wood – are made by hand in our own workshop in Denmark. Each knife holder goes through a long series of manual processes and is finally oiled with a furniture oil that brings out the natural character of the wood and gives a silky-smooth, long-lasting finish.
About the leather: Tuscan Vacchetta is a high-quality, vegetable-tanned leather originating from Tuscany, Italy. It is made from untreated cowhides and tanned with natural extracts from plants such as chestnut and mimosa. The leather is known for its full, smooth surface, warm tones and ability to develop a beautiful patina over time, and it is often used for bags, belts and other leather goods where both durability and looks matter. We use only certified leather from a recognised Italian producer that guarantees quality and authenticity. Leather thickness: 1.3–1.5 mm.
Custom size or a different design?
If you would like a magnetic knife holder in a custom size, or fancy one of our other designs – for example linoleum or black-stained oak – feel free to contact us at info@rune-jakobsen.dk. Minor deviations from the standard sizes are made at no extra charge.
Which length should I choose?
The length determines how many knives your magnetic knife holder can hold. Lay your knives in a row with the spacing you want and measure the total width – that is the minimum length your new magnetic knife holder should have.
Which magnetic knife holders are the strongest?
A standard model 4.5 cm wide has more than enough power for the vast majority of kitchen knives. Width is therefore mainly a question of design – the magnetic strength is the same across widths within the same series.
- Magnetic knife holders 4.5–8.5 cm wide have the same magnetic strength.
- Magnetic knife holders 10–28 cm wide have approx. 50% stronger magnets.
- All Extra Strong designs have 100% stronger magnets than the standard models.
If you have very large or heavy knives, we recommend a wide or Extra Strong model. The larger magnetic contact surface keeps the knives extra stable.
Sizes in cm and inches
All sizes in the shop are given in centimetres. cm → inches: multiply by 0.39 · inches → cm: multiply by 2.54.
| cm | inches |
|---|---|
| 20 cm | 7.9″ |
| 30 cm | 11.8″ |
| 40 cm | 15.7″ |
| 50 cm | 19.7″ |
| 60 cm | 23.6″ |
| 80 cm | 31.5″ |
Knife blades: 8″ = 20.3 cm · 10″ = 25.4 cm · 12″ = 30.5 cm. For an exact conversion, a quick Google search – e.g. "20 cm in inches" – is the easiest way.
Need help?
If you are unsure which magnetic knife holder to choose, you are always welcome to email us at info@rune-jakobsen.dk
Inspiration: Magnetic knife holder vs. knife block – which should you choose? · Knife block on the worktop or magnetic knife holder on the wall? · Which magnetic knife holder is right for your kitchen?
Relevant products and collections
All magnetic knife holders come with two hidden keyhole fittings on the back. We use different types of fittings depending on the design, but the principle is the same.
Two screws go into the wall, and the magnetic knife holder hangs on them. Screws and wall plugs are included with your order.
If you would rather mount it without screws, you can use construction adhesive or strong double-sided tape. We usually recommend No More Nails from Pattex, but any construction adhesive will work as long as your knives are not too heavy and the wall is perfectly flat. When ordering, please leave a note in the cart so we can leave the back completely smooth and unoiled – your adhesive or tape will grip far better.
Alternatively, we can position the fittings to match two grout lines in a tiled wall. All we need is the exact distance between the two joints when you order.
Magnetic mounting
If you prefer a solution with no screws and no adhesive at all, we offer Knifeboard Magnetic — a magnetic knife holder with a magnetic back, designed to mount straight onto a fridge, extractor hood or any other magnetic surface. It goes up and comes down without tools and without leaving a mark.
If you would like magnetic mounting on one of our other designs, we can make it as a bespoke solution. Write to Kari at info@rune-jakobsen.dk and we will find the right solution for you.
(Please note that all warranties are void if the magnetic knife holder is mounted without using the mounting fittings.)
Inspiration: How to install a magnetic knife holder from Rune-Jakobsen Design · Wood, leather or linoleum on a magnetic knife holder? · Can a magnetic knife holder damage your knives?
Relevant products and collections
We only use carefully selected FSC certified furniture wood. The primary wood types are oak and walnut.
We finish all products with a food-approved oil.
PLEASE NOTE that we always try to create unique and well-crafted products with an exciting visual expression and play of colors. You should therefore take our photos as a guide and not as a guarantee of how the finished product will appear.
Remember that wood is a living material. No two pieces of wood are the same, so all product photos are indicative.
You can benefit from surfing around our website and seeing examples of products we have made in the different types of wood to get a better impression of the wood's color variations, structure and expression.
If you are in doubt about choosing a type of wood for a product, you are very welcome to contact us to discuss the options. We are happy to advise and inspire 😊
Inspiration: Wood vs. plastic vs. bamboo – which cutting board should you choose? · Oak vs. walnut – which type of wood is best for cutting boards? · End grain vs. long grain – which chopping board should you choose?
Relevant products and collections
To keep both your knives and your magnetic knife holder or knife block in the best condition, always put the knives back only when they are completely clean and completely dry. Damp knives can damage the surface over time and leave marks.
Wipe your magnetic knife holder or knife block regularly with a slightly damp cloth, and avoid detergents and harsh chemicals. If needed, the surface can be refreshed with a little natural wood oil on a soft cloth.
Avoid placing the product close to strong heat sources or in direct sunlight, as this can dry out the wood and change its colour over time.
With proper care, your magnetic knife holder or knife block will keep its looks and its function for many years.
Relevant products and collections
In-stock items are dispatched within 1-2 working days. Handmade products are made to order — the current lead time is shown on the product page.
We ship with Postnord/DPD, GLS, DHL or UPS, and you choose the carrier and service level yourself at checkout. Shipping is calculated by weight, dimensions and delivery address — we add no margin to shipping.
Starting prices (the final price is calculated at checkout):
- Denmark: From 39 DKK to a parcel shop / 59 DKK to a private address. Free shipping on orders over 2,500 DKK.
- Sweden: From 135 SEK. Free shipping on orders over 2,500 SEK.
- EU countries: From 9 EUR.
- Norway: From 159 NOK. Free shipping on orders over 4,000 NOK.
- United Kingdom: DDP from 14 GBP.
- Switzerland / Liechtenstein: DDP from 19 CHF.
- USA: DDP from 35 USD.
- Canada: From 49 CAD.
- Australia: From 85 AUD.
- New Zealand: From 89 NZD.
- Rest of the world: From 35 USD.
Read the full shipping policy · Customs, VAT and taxes by country
You have a 30-day right of withdrawal on all products — including made-to-order Woodworks products. Notify us at info@rune-jakobsen.dk within 30 days of receipt; you then have 14 days to return the item unused and undamaged.
You pay the cost of the return shipment yourself, unless it is a complaint. Danish customers can order a return label via Shipmondo. Once we have received the item, we refund the full purchase price.
Return address: Rune-Jakobsen Design ApS, Att.: Kari Rune-Jakobsen, Tiendemarken 14 A, Gudum, 9280 Storvorde, Denmark.
Complaints: Under the Sale of Goods Act you have a 2-year right of complaint for manufacturing and material defects. For a justified complaint we cover the cost of the return shipment.
All orders are shipped from our workshop and warehouse in Denmark. For customers in the EU, Norway, the United Kingdom and Switzerland, VAT is included in the price at checkout.
- EU: Local VAT is included — no customs duties, no fees.
- Norway: Norwegian VAT is paid in the webshop (VOEC 3053342). Below 3,000 NOK: no customs duty, the order is shipped DAP. Above 3,000 NOK: any customs duty is calculated and paid in the webshop, the order is shipped DDP. No extra charges on delivery.
- United Kingdom, Switzerland/Liechtenstein and USA: All orders are shipped DDP — VAT and any customs duties are paid at checkout. The price you see is the final price.
- Australia: Shipped DAP. Under 1,000 AUD: no duties or GST. Over 1,000 AUD: duties and GST are collected by the carrier before delivery.
- Canada: Shipped DAP. GST/HST and any handling fee are collected on import; goods of EU origin are duty-free under CETA.
- Other countries: Shipped DAP — local duties and fees are collected by the carrier on arrival.
Real products – honestly explained
For us, craftsmanship, materials and aesthetics come first. Our images should give you an accurate impression of what you are buying. That is why you also deserve an honest explanation of how we work with product photos.
Where do the images come from?
- Our own photos: We photograph the products from Rune-Jakobsen Woodworks ourselves. They are real, handmade products from our workshop. We also photograph part of the rest of our range ourselves.
- Photos from the makers: For some of the brands we carry, we use the manufacturer's own product images combined with our own photos.
- Customer photos: Now and then, customers send us photos and give us permission to use them. We show them exactly as we received them.
Where do we use AI?
Some of our images have been edited with AI tools. We do this to:
- show the product in a home or kitchen, so you can see it in context
- clean up the background, adjust the lighting and remove dust or distracting reflections
We do not use AI to change a product's shape, size, proportions, material or colour, and we never show AI-generated products that do not exist. Every image is based on a photo of the real product. We compare every AI-edited image with the physical product before it goes live in our shop.
Our images may inspire you – but they must never promise more than the product can deliver.
Images when choosing a variant
Many of our products come in a wide range of sizes and variants, and we do not yet have images of all of them. The image shown for your selection therefore primarily shows the wood species. It does not necessarily show the exact size or design variant.
Every piece is unique
Many of our products are handmade one-of-a-kind pieces, and natural materials such as wood, ceramics and glass vary from piece to piece. That is why the product you receive will never be completely identical to the one in the picture. This is exactly what sets craftsmanship apart from mass production.
Not sure? We're happy to help.
If you have questions about design, size, wood species or special requests, write to us at info@rune-jakobsen.dk. We will gladly advise you before you order.
Our customer service is Kari or Torben.
When you email, text or call us, it is Kari or Torben you reach — with in-depth knowledge of the products and a genuine interest in helping you make the right choices.
If you use the online chat at the bottom of the screen, you will meet an interactive chat that can answer the most common questions right away. You will also find answers in our FAQ and on the product pages.
If you would rather talk to a person, cannot find the answer in the chat, or want a product in a custom size, you are always welcome to contact Kari or Torben directly. If we cannot reply immediately, you will hear from us within a few hours on all weekdays.
Choose options
CREATING THE OPTIMAL MAGNETIC KNIFE HOLDER IS A MATTER OF KNOW-HOW AND AESTHETICS!
It takes knowledge and experience to choose the right type of magnet and set it invisibly into the wood, so the full magnetic force runs the whole length or width — and the blade holds just firmly enough that the knife lifts off the block or the magnetic knife holder without unnecessary force.
That is the know-how behind the magnetic knife holders from Rune-Jakobsen Design.
Read more about our magnetic knife holders here:We know what we are doing — whether it is a standard piece or made to your measurements, we take the trouble to build the best, most beautiful and most functional magnetic knife holder on the market.
Every time!
