- is a classic and well-known type of wood. The color in the inner part of the trunk (the heartwood) goes from reddish to grey-brown depending on the oak variety, and it gets darker with age and exposure to light. The outermost part of the trunk (the splinter) is lighter and without as much color pigment.

 

 

 

 

 

 

 

 

- is oak that has gone through a steam treatment, which results in the coloring of the wood. We only use "real" smoked oak - i.e. that we do not cut corners by using a dark stain or dark-colored oil. Therefore, our smoked oak can also vary slightly in its expression of color.

Depending on the woods own acid content, the color after treatment can vary from light honey brown to deep black. The smoked wood does not contain any harmful substances after treatment. NOTE that smoked oak can stain if it comes into direct, long-lasting contact with regular light oak or brass table plates.

NOTE the colour of the finished oak may vary. Therefore, 100% uniformity in the entire product cannot be expected. If you do not like the finished result, we will of course exchange with a smile😊

 

You are welcome to contact us before ordering if you have special wishes for the smoked oak. We can tone it from completely light to very dark as desired.

 

 

 

- is a very beautiful variety of wood with lively vein lines that change from light to dark brown with an at times dark purple glow. Vein lines, colours and structure of walnut trees vary greatly - but it is always beautiful..

 

 

 

 

 

- Wengé is a very hard and dark wood that grows in central parts of Africa. Wengé is used exclusively in our Black Edition Products

 

The vast majority of knife rails and knife blocks on the market are mass-produced in large numbers.

With us you will find the market's best and strongest knife holders of the highest quality - handmade to order especially for you and tailored precisely to your needs.

What sets our designs apart from traditional knife holders?
Unlike many other knife rails and knife blocks on the market, our knife holders are fully magnetic.

This means that the rail or knife block is fully magnetic throughout its entire length/width and you can place your knives anywhere on the rail or block.

We only use powerful, high-quality neodymium magnets in various sizes and formats, which are carefully selected so that they work optimally with the knife rail's design and purpose.

Many manufacturers choose to market point magnetic products that can only hold a limited number of knives as there is only one round magnet per knife.

Our knife rails contain several continuous rows of powerful N52 Neodyminum magnets along the entire length of the rail, so your knives are guaranteed to stay hanging regardless of size and weight.

So with us you will not find any cheap disc magnets drilled into the wood from the back of the rail, as is often the case with other rails on the market.

The bar magnets in our products are invisibly encapsulated in the wood and are distributed in several unbroken rows so that you achieve optimal adhesion with multiple contact points on each knife blade. This way you avoid your knives slipping down, or "spinning" around and being attracted to each other if they are close together.

A magnet is not just a magnet.
Powerful, high-quality N52 Neodymium magnets are expensive, so many manufacturers jump where the fence is lowest.

We import our magnets directly from a manufacturer we trust, who delivers our custom-made magnets in exactly the quality and formats we want - so you won't find any cheap hobby magnets in our designs.

That's why we give a 100% guarantee that your knives can be placed freely and hung exactly as you want on all our designs, no matter which one you choose - otherwise you get your money back 😎

• See the selection of wall-mounted knife rails
• See the selection of freestanding knife blocks

The knife magnets in the webshop are standard designs and formats - but you can easily have a product made to your specifications. Just contact us - and we will make a custom product for you.

We will of course make minor changes to the standard dimensions free of charge.

If you are looking for a special type of knife magnet or would like to have a storage solution designed and tailored, you are of course also welcome to contact us . We are ready to make a non-binding offer for exactly what you need.

The small difference that makes a big difference!
We differentiate ourselves from many other manufacturers by considering our knife holders as furniture that requires careful manufacturing and great attention to detail and finish.

We invest time in selecting the right wood to ensure that our products appear harmonious and visually appealing, and during production we prioritize meticulousness and thorough grinding processes that include coarse, medium and fine grinding done by hand. This ensures that the knife holders get a beautiful finish that will patina beautifully and last for many years.

All our products are finished with a discreet "Rune-Jakobsen" stamp and oiled with an environmentally friendly furniture oil, which supports our focus on quality and sustainability.

In other words, we do not create "buy cheap - use - and throw away" solutions in knife storage.

We strive for the highest quality, which reflects our uncompromising approach to both aesthetics and sustainability - made from solid, FSC-certified furniture wood.

Suspension:
All our knife rails come as standard with various types of hidden brackets for screw suspension on the back (screws and rawl plugs included)

But if you have, for example, a tiled wall that you do not want to screw into, most knife rails can also be manufactured without a suspension so that they can be glued on with, for example, “No more Nails” from Pattex or a similar mounting adhesive. Special requests for suspension should be stated in the notes section when ordering.

Return policy
When you order a unique knife block or knife holder in the webshop without having "seen it in real life", there will always be a built-in uncertainty as no two products are ever the same or have the same visual expression - so the result may not be quite what you had imagined or expected.

That's why there is a full right of return on all knife holders - even if they are custom-made.