'Top Notch Exclusive' lightweight cutting board with brass details
TOP NOTCH Exclusive is a popular cutting board with a hand grip and details in brass or alu, which give the board a sharp and exclusive expression.
With its thickness of only 2.5 cm, the Top Notch is suitable for serving but is also super practical in the kitchen as a cutting board as it is handy and easy to move around with.
When in the kitchen it is not always an advantage to use large cutting boards - often you have to cut small things, and big boards are heavy to move around, so why not split the tasks on separate boards? This also makes it easier to get help with cutting work
Top Notch is produced with brass details by default. If you want aluminum instead of brass, you can write it as a note in the shopping basket.
You can also get TOP NOTCH Exclusive in special measurements to fit over your kitchen sink, bathtub, sink etc. Send an email if you want a board in special dimensions.
About boards
The selection of handmade cutting and serving boards Rune-Jakobsen Design help you with your cooking and clothing, as well as any kitchen- or dining table.
We make everything from small spreaders to huge display boards, so you can definitely find a board with us that matches your wishes and needs.
The vast majority of serving and cutting boards on the market are mass produced in Asia or Eastern Europe.
With us, you will find Danish-produced boards, handmade in our joinery. The boards are produced individually and we make every effort to give each board a well-crafted, beautifully harmonious and individual expression.
The small difference that makes the big difference!
Unlike many other manufacturers of strawberry boards, we regard a board as a piece of furniture that must be produced with care.
We spend time on the visual expression and prioritize both coarse, medium and fine sanding with washing between each sanding, so that the end result is a beautiful board with a silky smooth finish that patinas beautifully and ensures you a board you can enjoy for many years without that it becomes rough and boring to look at and feel.
Only solid FSC certified furniture wood is used for all our boards. Likewise, the production of boards is under the control of the Danish Food Authority.
- See committee Cutting boards
- See committee Server board,
NOTE:
Wood is a living material that expands and contracts depending on temperature and humidity - unfortunately metal does not, so you will find that with boards with brass or aluminium, the metal will occasionally "stiff" a little - and other times it will be drawn accordingly into the tree. Hopefully, however, it will most often sit where it should as when the board was created.
When you order a unique board in the webshop without having "seen it in reality", there will always be some degree of uncertainty, as two boards are never the same or have the same visual expression - so perhaps the result was not quite as you imagined or expected.
Care and maintenance, cutting boards
CARE & MAINTENANCE
Even if you use our boards often, with the right treatment they will remain beautiful for many years. If you use the board as a cutting board, however, there will be scratches and marks in the wood - this cannot be avoided.
Please note that wood is a living material that expands and contracts depending on temperature and humidity - unfortunately metal does not, so you will find that with boards with brass or aluminium, the metal will occasionally protrude a little - and other times it will be drawn slightly into the wood. These changes occur temporarily as a response to temperature. Hopefully, however, it will most often sit where it should as when the board was created.
Wash the board by hand immediately after use, or wipe it with a wet/damp cloth. Remember to make it wet on both sides, otherwise it can warp - this especially applies to thin boards.
Limitations of Use.
● Do not put in the dishwasher● Do not use for long-term food storage
● Must not be used for purposes other than cooking/preparation for cooking
● May only be maintained with food grade cooking oil
In case of further questions, please feel free to contact us.
The board can easily withstand general hand washing with dishwashing liquid, but the soap will gradually remove the oiling.
NOTE that boards in smoked oak can stain if they come into direct, long-term contact with light oak- or brass table tops.
You can give the board a thin layer of ordinary cooking oil on all surfaces from time to time - this will preserve the wood's glow. The board must be completely dry before you apply oil. Should the board nevertheless become a little "rough" to the touch over time, it is because the wood's fibers rise slightly on the surface.
You can make the board smooth again by sanding the wood gently in the direction of the grain with a fine-grained sandpaper with a grain size of 400 or higher, and then giving it a thin layer of common cooking oil (e.g. sunflower oil).
We only use carefully curated FSC certified furniture wood. The primary woods are oak, smoked oak and walnut. In addition, we offer a number of special types of wood that are sold in conjunction with special orders, e.g. Teak, ash, chestnut, golden rain, cherry, wengé, zebrano, beech, etc.
We finish all products with a high-quality wood oil, but if you would prefer e.g. an oil with a white pigment, we can of course do that too - the desired final treatment can be mentioned under the remarks of the ordering.
If you do not find what you are looking for on this page, or if you have questions, we can be contacted by phone +45 4243 4393 or mail.
NOTE that we are always trying to create unique and elaborate products with an exciting visual expression and colour profile. You should therefore take our product photos with a grain of salt and not as a guarantee of how the finished product looks.
Remember, wood is a living material. There are no two pieces of wood that are identical, so all product photos are only indicative.
You can do a little surfing on our website and see examples of products we have made in the different woods to get a better impression of the colour variations of the woods, structure and expression.
If you are in any doubt about choosing a type of wood for a product, you are welcome to contact us for a chat about the possibilities. We gladly counsel and seek to inspire 😊
Copper details?
You can now get all RJ Woodworks products with copper details as an alternative to brass or aluminium for an additional charge depending on size and design.
If you are interested in inquiring about the price for a product with copper details, please feel free to send an mail
In general
All product photos are real photos of the specific products. However, some photos have added interiors and surroundings created using artificial intelligence to create atmosphere and put the product into context.
Regarding Woodworks
We aim to continuously expand the catalog so that sizes and designs are best illustrated in the webshop.
There are not photos of all variants and sizes, so the photo that appears when choosing a variant in the webshop mainly reflects only the type of wood - not necessarily size or other variations in the design.
NOTE that we always try to create unique wooden products with an exciting visual expression. You must therefore take our product photos as a guide and not as a guarantee of how the finished product appears in terms of year drawings and color play.
Any questions?
If you have questions about the choice of design, sizes, colors or type of wood - or if you have special wishes, you are always very welcome to contact us at info@rune-jakobsen.dk and get your questions clarified before you order.
Choose options
